3D Printing PETG eSUN 3.00mm - 1 kg
- Odorless,
- Little shrinkage rate,
- Hydrophobicity(Will not absorb water and as such clog the extruders),
- Outstanding toughness and high impact strength,
- Good liquidity(flows smoothly);
- High mehanical strength and excellent flexibility;
- High transparency,
- Good gloss,
- Recyclable.
Specifications
- Weight: 1 kg
- Diameter: 3.00mm (Accuracy:2.9-3.0mm)
- Recommended Printing Temperature: 230 - 250°C
- Bed temperature 80°C (Recommended but not needed)